0 items in the shopping bag
Showing 1–36 of 53 results
-
ALUMINUM SAND SCOOP
Quantity Price 1 - 10 £6.65 11 - 20 £6.20 21 - 30 £6.00 31 - 100 £5.75 -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
ALUMINUM SAND SCOOP
Quantity Price 1 - 10 £6.65 11 - 20 £6.20 21 - 30 £6.00 31 - 100 £5.75 For scooping Moulders Sand.
-
-
-
CASE HARDENING POWDER
£187.58Specially formulated to give an acceptable depth of case hardening to small metal pieces where production time is limited.
-
CASTING INGOTS
£0.00CASTING INGOTS
WE CAN SUPPLY INGOTS IN THE FOLLOWING GRADES OF MATERIAL:- SILICON BRONZE,GUNMETAL,ALUMINIUM OR BRASS.
PLEASE CONTACT US FOR PRICES ON TEL:- 01384 424232 FAX:- 01384 893171 -
CERAMIC WASH
£56.63Essential coating to mild steel tools that come into direct contact with molten non-ferrous metals.
5 Litres Ceramic wash -
-
CORE PUTTY
£9.60CORE FILLER PUTTY
Core Filler (Putty) is used for filling surface imperfections in moulds & cores and filling the joints in core assemblies We have several options depending on your requirements.
COREFILLER 5Water based air drying soft mouldable core putty for general repairs to cores and moulds.Available in 8 kg re sealable plastic tubs -
CORE VENT
£14.38–£35.69Core Vent is manufactured from high-quality plastic wires and are used to guarantee open channels to provide free flow of gasses created in the casting process.
-
-
DIE COATINGS
£13.80–£24.90Die coatings for gravity and low pressure diecasting
The DYTEK range is suitable for the coating of dies and tools in Gravity/Permanent mould and Low Pressure die casting applications. They are water based and generally sprayed but can be dipped or brushed. Depending on the grade DYTEK can influence the following properties:
> Increase metal flow in the die
> Control heat transfer
> Improve release of the part from the die
> Improve surface finish
> Increase die life -
-
-
-
FULLY PERFORATED SKIMMING GATES
£7.75–£14.05Price per 100 Min Order – 2000 A gating arrangement designed to prevent the passage of slag and other undesirable materials into a casting.
-
-
-
-
-
-
-
MILD STEEL MELTING POT
£18.45–£39.95To hold Lead and other non-ferrous low temperature metals during melting.
-
MOULD AND CORE ADHESIVE
£6.30–£29.90A fast setting adhesive suitable for use on all types of chemically bonded sand moulds and cores.
Can be used for normal core gluing on any type of sand bond where a rapid evaporative adhesive is required. KWIKFIX adhesive is a mineral paste containing solvent (acetone) and resin,that has been developed to produce strong joints very quickly. An initial bond is formed almost immediately (subject to temperature) followed by a progressive increase in strength until full set is reached in 10-15 minutes. -
MOULD AND CORE COATINGS
£44.5025kg Steel Open Top Drum
CLEANCAST mould and core coatings
Foundry coatings cover a wide range of applications from resin bonded sand cores and moulds, Iron ingot moulds, refractory launders to non ferrous die casting and even non wetting ladle coatings.What they all have in common is that they provide a thin barrier (usually less than 0.5mm) between the liquid metal and substrate they are applied to. They are a critical consumable in any cast metal plant and can have a significant impact on the production costs and quality of your castings -
MOULD JOINT SEALANT
£1.58HIGH TACK MOULD SEAL FOR PRECISE APPLICATION
Purpose – Provides a seal and bond between mould joints reducing flash and preventing run outs. NILSCRAP has a very high Tack and can be applied very precisely and economically when used with the correct mastic gun.
380ml Mastic Cartridge -
-
-
MOULDING BENCH
£1,530.60MOULDING BENCH
Rigidly constructed to be totaly stable with 200kg sand bin full to capacity.
Restricts sand within a specific area when filling moulding flasks and so helps keep the floor sand free and reduces the chance of accidents.
-
Naturally Bonded Green Sand
£40.00A standard quarried sand containing naturally occurring levels of clay binder and moisture.
Naturally Bonded Green Sand 25kg -
OIL BONDED MOULDING SAND
£28.80Used to give a high quality casting surface finish.
25Kgs Oil Bonded Sand – Bentomix -
-